Instructions for the “Girlfriend Jeans HJ11” Pattern

Sewing Girlfriend Jeans: Cover Image for the Instructions

 We’re delighted that you’ve chosen the smartPATTERN Girlfriend Jeans HJ11 sewing pattern – or perhaps you’re still thinking about downloading it! You’ll find everything you need to sew your own Girlfriend Jeans in these step-by-step instructions.

This sewing pattern is part of Kollektion mit Herz (Collection with Heart), a collaborative project bringing together designer Carolin Behrens (formerly at Hugo Boss), independent sewing pattern brands and the sewing community.

From 21 November to 31 December 2026, we’re joining forces to offer nine exclusive sewing patterns free of charge. Our aim is to bring the sewing community together and raise funds for children and young people facing difficult circumstances. The patterns are our contribution to the fundraising campaign – and an invitation for everyone to get involved.

During the campaign, all nine sewing patterns are available free of charge, with no donation required to download them.

Have a look at our FAQ for answers to frequently asked questions, along with helpful tips on choosing fabrics, haberdashery and more.

If your questions are not answered there or you have feedback for us, please send us an e-mail to hallo@smartpattern.de.

We have deliberately decided to make our instructions available online only. This saves a lot of paper, because not everyone wants to use printed instructions. You can also zoom in if you can’t see something straight away or the font is too small. Of course, you can also print out the individual instructions if you wish. To do this, use the corresponding print options in your internet browser. In many browsers, it is also possible to save the respective page so that it is available offline. This means you don’t always need an internet connection while you’re sewing and you can still save yourself the trouble of printing out on paper.

Sizes and measurements

Size selection

The pattern is based on a body height of 168 cm. Choose your size based on the circumference of your hips. If you are between two sizes, we recommend the larger size.

Since you’ve chosen a pattern in ready-to-wear sizes, you may need to adjust the pattern’s length, waist, and leg width if the measurements in our charts don’t match your body measurements.

Body measurement table

Here you’ll find a body measurement chart that you can compare with your own measurements. Click the button to access instructions on how to take your measurements correctly. There you’ll also find a PDF file where you can enter your measurements and then save them for future reference.

To the measuring instructions

All measurements are given in cm! If you want to convert to inches, divide the values by 2.54.

Inch Size (width/length)26/3127/3128/3129/3131/3132/3134/3136/3139/3142/3144/3147/3150/3153/3157/3160/31
US Size024681012141618202224262830
UK Size46810121416182022242628303234
EU Size32343638404244464850525456586062
Waistband circumference7275788185899399105111117123131138146153
Hip circumference88919497101105109115120126131137144151158165
Thigh circumference53555658606264676972747780848791
Knee circumference34343536373839404143444547485051
Heel-instep circumference31313232323333343435363637373839
Side length to waistband topedge100100101101101102102103103103104104105105106106
Inner leg length78787878787878787878787878787878

Finished measurements table

We have listed some of the measurements of the finished trousers in the finished measurements table. The circumference measurements are given as half measurements, i.e. half the waist size etc.. So you can easily compare them with the measurements of existing, well-fitting trousers. Here you will find a sketch where you can see where the respective measurements are taken.

All measurements are given in cm! If you want to convert to inches, divide the values by 2.54.

Inch Size (width/length)26/3127/3128/3129/3131/3132/3134/3136/3139/3142/3144/3147/31
US Size0246810121416182022
UK Size468101214161820222426
EU Size323436384042444648505254
1/2 Waistband circumference35373840424446495154576064687175
1/2 Hip circumference*46474950525456596264677073778084
1/2 Thigh circumference29303031323334363738404143454648
1/2 Hem circumference22232324252526262728292930313233
Side length to waistband topedge101101102103103104105105106106107108108109110110
Inner leg length77777777777777777777777777777778
*Hip hight to waistband topedge16171718181919192020212122222223

Product description

These jeans feature a regular fit with a slightly flared bootcut leg, a medium rise, and a regular fit. The O-shaped yoke adds a distinctive touch to the back and accentuates the trousers’ silhouette.

Patch pockets on the front and back create a casual, modern jeans look. The front fly features a classic zipper closure.

One special detail is the buttoned hem. The inside of the hem can be finished with a contrasting fabric. This allows you to turn up the hem as desired, revealing the contrasting fabric as a decorative detail.

These jeans combine a simple, everyday fit with unique design details and can be customized to suit your individual style depending on the fabric and construction.

General information

Seam allowances

Our patterns already include all seam allowances. The standard seam width is 10 mm. We use wider seam allowances at some seams so that the width can be adjusted if necessary. These wider allowances are marked with a notch at the beginning and end of the seam.

The seam lines are also visible in the paper pattern for the smallest size. You can determine the width of the seam allowances by measuring the distance between the seam line and the cutting line. The seam allowances are the same for all sizes.

If you have bought or would like to buy the pattern as a PDF file, please take a look at these instructions. There we explain how you can show and hide the seam and cutting lines for individual sizes in the PDF file.

Scope of delivery of the PDF pattern

You will receive the following files:

  • The pattern as a PDF file in A4 format (also works for letter)
  • The pattern as a PDF file in A0 format (the width of the pattern is A0 format, but can be longer – depending on how much space is required for the pattern pieces).

You will receive the pattern in two formats and can decide for yourself whether you want to print out the A4 file at home, glue it together and get started straight away. If you don’t feel like gluing, you can give the A0 file to a copy store or an online print shop and have a large pattern sheet created for you. Please note the additional printing and shipping costs of the respective provider.
You can open the PDF files with the free Adobe Reader.

Abbreviations

We use these abbreviations in our patterns:
VM | CF = centre front
HM | CB = centre back
RV | Zip = zipper
SN = side seam

Fabrics and materials

You’ll need the following materials to sew the girlfriend jeans. Refer to the table below to see how much fabric you’ll need for your size and how long the zipper should be.

  • Outer fabric: non-elastic denim, e.g. cotton or hemp
  • Pocket lining, e.g. thin, firm cotton fabric
  • Fusible interfacing, e.g. Vlieseline G 405
  • Bias tape 1.2 cm wide, e.g. Vlieseline T12
  • 1 zipper, length see below
  • 1 button for waistband, approx. 15 mm diameter
  • 4 buttons / cufflinks or knots for the hem slit
  • Yarn matching your materials

We strongly recommend that you wash the fabric before sewing to prevent your finished girlfriend jeans from shrinking later on. So wash the fabric exactly the same way (temperature, spin cycle, etc.) that you’ll wash the finished garment later, and be sure to follow the manufacturer’s instructions.

Take any shrinkage into account when purchasing the fabric! Unless otherwise stated for the respective fabric, assume an addition of 10 %, which should normally be sufficient.

With denim fabrics, it can happen that the fabric gets light-colored stripes during washing, namely where creases form during the washing process. This cannot always be 100% avoided. However, it helps if you place the fabric in a large bowl or similar in water before putting it in the washing machine and allow it to completely soak up the water.

To prevent or reduce bleeding on colored fabrics, you can add a dash of vinegar to the washing machine or water.

The following length specifications per size refer to the usable material width specified in the left-hand column, assuming that the fabric is plain-colored. If you choose a patterned fabric, you may need more fabric depending on the size of the pattern.

Inch Size (width/length)26/3127/3128/3129/3131/3132/3134/3136/3139/3142/3144/3147/3150/3153/3157/3160/31
US Size024681012141618202224262830
UK Size46810121416182022242628303234
EU Size32343638404244464850525456586062
Main fabric, 140 cm width130130139141151157186190199211214226241245247261
Pocket lining, 140 cm width24242424242424242424242424242424
Interfacing, 90 cm width17172222242427273131373745455656
Zipper length 11111212131313141414151516161617

Print the pattern and prepare it for cutting

You can find out how to prepare your pattern for cutting in the instructions Preparing patterns in ready-made sizes. The first part explains how layer printing works for A4 and A0 files. If you have already printed out your pattern, you can start directly at point 7. This is about cutting out and sorting the pattern pieces.

The picture explains the labeling of the smartPATTERN cut parts.

Here you can see an example of the labeling of a smartPATTERN pattern piece.

Size legend for SChnitt pattern sheet from size 32 to 62

In the legend of your pattern sheet, you can see which line type (=cutting edge) you have to follow when cutting out your chosen clothing size.

Cutting

Below you will find some example cutting plans based on the fabric widths given in the material consumption table. If you are using a fabric that is narrower, you will most likely need more fabric and will have to arrange the pattern pieces differently. If your fabric is wider, you may need less length.

You can arrange the pattern pieces in advance on a large table or the floor, on which you mark your fabric width, to find out exactly what length of fabric you need. Remember to take into account any shrinkage values of the fabric!

The pattern pieces are placed on the open or folded fabric. The right side of the fabric, or in the case of the iron-on interfacing, the side without the adhesive dots, should be facing upwards. You can find out whether you need to cut a pattern piece individually or twice (as a pair or in pairs)
from the label on the pattern piece. You can find more information on this in the instructions for cutting fabrics and materials.

Cutting plans

Main fabric – Size 40

Cutting Pattern for Girlfriend Jeans HJ11 Outer Fabric Size 40

Main fabric – Size 50

Cutting Pattern for Girlfriend Jeans HJ11 Outer Fabric Size 50

Main fabric – Size 60

Cutting Pattern for Girlfriend Jeans HJ11 Outer Fabric Size 60

Lining fabric – all sizes

Cutting Pattern for Girlfriend Jeans HJ11 Lining Fabric, All Sizes

Interfacing- Size 40

Cutting Pattern for Girlfriend Jeans HJ11, Size 40

Interfacing – Size 50

Cutting Pattern for Girlfriend Jeans HJ11, Size 50

Interfacing – Size 60

Cutting Pattern for Girlfriend Jeans HJ11, Size 60

Sewing instructions

For each step, there are detailed sewing instructions in both text and pictures, and for most steps, there are also video tutorials. Below, you’ll find the instructions in the order you’ll need them for sewing.

Click on the respective link next to the numbering for the illustrated text instructions. You can access the video instructions by clicking on the corresponding image.

We hope you have fun and success sewing your girlfriend jeans!

We highly recommend that you do not skip this step. Of course you will need some time – about 1 hour – for stitching and unstitching, but it is much easier to make changes at this stage than later!

Placeholder for no video available

10. Optional: Attaching rivets

Show your work

We’d love to see your creations on Instagram! Tag us with @smartpattern and use the hashtag #smartpatterngirlfriendjeans so we can find you.

Browse through our store and discover your next project!

Legal matters

MISUSE and COMMERCIAL USE

These sewing instructions and the pattern (including all texts, illustrations, photos and graphics) are protected by copyright. Any distribution or reproduction is not permitted. If you would like to sell a product commercially, which is sewn according to this pattern, please contact us by e-mail: lizenzen@smartpattern.de